AVENO WIV LL IV 0W-20

From 1 to 1,000 litres - thanks to high-tech and high-performance facilities, we can offer all AVENO products in the most common container sizes, regardless of the application.

AVENO WIV LL IV 0W-20
product title
0002-000776-001
0002-000776-004
0002-000776-005
0002-000776-020
0002-000776-060
0002-000776-999
Article number: 0002-000776
AVENO WIV LL IV 0W-20 was specially developed for the latest Volkswagen specification VW 508 00/509 00 (also known as VW Blue Oil). It combines durability and protection in a low viscosity motor oil with reduced HTHS. Developed by experts to support the service life and efficiency of vehicles with gasoline and diesel engines of the latest generation, which require the viscosity grades SAE 0W-20. The specification ACEA A1 / B1 is fulfilled and therefore AVENO WIV LL IV 0W-20 is also suitable for many vehicles from other manufacturers.
Anwendungshinweis
AVENO WIV LL IV 0W-20 can be used in modern engines that comply with the VW 508 00/509 00 standard. For other VW standards AVENO WIV LL IV 0W-20 is not suitable. In addition, the oil is used with extended oil change intervals (longlife) when an SAE 0W-20 engine oil with reduced ash content and reduced HTHS is required. Differentiators such as a specific color and chemical markers are included. Note the manufacturer's instructions!
Eigenschaften
  • Future-proof additives for future engine generations
  • High fuel efficiency
  • Excellent engine protection
  • Excellent for extended maintenance intervals
  • Lowered HTHS viscosity for maximum fuel savings
  • Highest oxidation stability based on fully synthetic PAO base oils
  • VW Blue Oil typical coloring to avoid mix-ups
  • Best cold start properties
Viscosity
0W-20
Recommendation
FORD WSS-M2C956-A1, Porsche C20, VW 508 00/509 00
Specification
ACEA C5
PROPERTIESDATAUNITEXAMINATION AFTER
Kinematic Viscosity at 40°C44,2MM²/SDIN 51659-2:2017-02
Kinematic Viscosity at 100°C8,3MM²/SDIN 51659-2:2017-02
Viscosity Index167DIN ISO 2909:2004-08
AppearanceGREENVISUELL
Viscosity CCS at -35°C5887MPA*SASTM D 5293:2020
Density at 15°C849KG/M³DIN EN ISO 12185:1997-11
Pour Point-54°CASTM D 7346:2015
Total Base Number (TBN)8,6MGKOH/GASTM D 2896:2015
Product Data Sheet

Notice
To the best of our knowledge, all information on this product page corresponded to the current findings and developments of Deutsche Ölwerke Lubmin GmbH at the time of creation. Our products are continuously further developed. For this reason, our products, the manufacturing processes and all related information on this product page are subject to change at any time and without notice, unless customer-specific agreements exist. The published data are based on standardized test methods under appropriate laboratory conditions and are to be regarded as general, non-binding guide values.

Proper disposal
After use, this oil belongs in a waste oil collection point! Improper disposal of used oil endangers the environment! Any admixture of foreign substances such as solvents, brake and cooling fluids is prohibited. Non-contaminated and empty packaging can be recycled.