AVENO Mineral Hydraulic HLP 32

From 1 to 1,000 litres - thanks to high-tech and high-performance facilities, we can offer all AVENO products in the most common container sizes, regardless of the application.

AVENO Mineral Hydraulic HLP 32
product title
0002-000239-020
0002-000239-060
0002-000239-200
0002-000239-999
Article number: 0002-000239
AVENO Mineral Hydraulic HLP 32 is a mineral-oil based hydraulic fluid with highly effective additives. It is optimally alloyed, has a high level of performance and a wide range of applications within the entire industry. AVENO Mineral Hydraulic HLP 32 offers a high wear protection, even under extreme loads, thanks to effective additives. AVENO Mineral Hydraulic HLP 32 is characterized especially by a very good viscosity and temperature behavior, high resistance to aging and reliable corrosion protection.
Anwendungshinweis
AVENO Mineral Hydraulic HLP 32 is universally applicable in all hydraulic systems. It is recommended for thermally highly stressed hydraulic systems with high-pressure pumps of all models, in sensitive control systems, and also for the supply of small gear units and for use in circulation systems.
Eigenschaften
  • Reliable protection against corrosion
  • Excellent wear protection
  • Very good oxidation stability
  • High resistance to aging
  • Neutral towards sealants
Viscosity
ISO VG 32
Recommendation
Atos, Bosch Rexroth RE 90220, Danieli Hydraulics, Denison HF-0/HF-1/HF-2, Eaton/Sperry Vickers I-286-S, Eaton/Sperry Vickers M-2950-S, Fives Cincinnati P-38/P-68, GM LH-02-1-04, GM LS-2, Metso, Müller Weingarten, Sauer-Danfoss 520L0463, SEB 181 222, US Steel 126/127/136, Voith Turbo (HLP 32)
Specification
AFNOR NF E 48-603 HM, ASTM D6158, CETOP RP 91H HM, DIN 51524-2, GB 111118.1 L-HM (conventional), ISO 11158 HM, ISO 6743-4 HM, JCMAS HK, MIL-PRF-17672 E, SAE MS1004 HM, VDMA 24318
PROPERTIESDATAUNITEXAMINATION AFTER
Kinematic Viscosity at 40°C32,0MM²/SDIN 51659-2:2017-02
Kinematic Viscosity at 100°C5,6MM²/SDIN 51659-2:2017-02
Viscosity Index115DIN ISO 2909:2004-08
AppearanceYELLOWVISUELL
Density at 15°C859KG/M³DIN EN ISO 12185:1997-11
Pour Point-33°CASTM D 7346:2015
Product Data Sheet

Notice
To the best of our knowledge, all information on this product page corresponded to the current findings and developments of Deutsche Ölwerke Lubmin GmbH at the time of creation. Our products are continuously further developed. For this reason, our products, the manufacturing processes and all related information on this product page are subject to change at any time and without notice, unless customer-specific agreements exist. The published data are based on standardized test methods under appropriate laboratory conditions and are to be regarded as general, non-binding guide values.

Proper disposal
After use, this oil belongs in a waste oil collection point! Improper disposal of used oil endangers the environment! Any admixture of foreign substances such as solvents, brake and cooling fluids is prohibited. Non-contaminated and empty packaging can be recycled.