AVENO Dexron D II RED

From 1 to 1,000 litres - thanks to high-tech and high-performance facilities, we can offer all AVENO products in the most common container sizes, regardless of the application.

AVENO Dexron D II RED
product title
0002-000157-001
0002-000157-004
0002-000157-005
0002-000157-020
0002-000157-060
0002-000157-200
0002-000157-999
Article number: 0002-000157
AVENO Dexron D II RED is a very high-quality gear fluid for automatic gearboxes of all vehicles and machinery. It is made with a base of highly refined mineral oils with suitable additives. It was developed especially for the indicated specifications and purposes. AVENO Dexron D II RED provides maximum lubrication and wear protection thanks to its special additives.
Anwendungshinweis
AVENO Dexron D II RED was developed for use in automatic gearboxes, hydraulic steering systems, converters and power transmissions, and can be used as a universal ATF (automatic transmission fluid) for all vehicles and machinery. It is recommended if an ATF type Dexron D II must be used in accordance with the manufacturer's specifications. The operating instructions of the automobile and engine manufacturer must be observed.
Eigenschaften
  • Reliable protection against wear, silting, bonding and corrosion
  • Stable and excellent viscosity-temperature behavior
  • Problem-free, both at very low and very high temperatures
  • Foam-free, even under the heaviest of loads
  • Extremely high thermal load bearing capacity
  • Miscibility and compatibility with all brands of ATFs
  • Neutral towards sealing agents
Viscosity
ATF
Recommendation
Caterpillar TO-2, DTFR 13C120 (236.2), MB 236.6, DTFR 13C140 (236.7), Ford ESP-M2C166-H, Ford WSS-M2C185-A, Ford SQM-2C9010-B, Ford WSS-M2C138-CJ, MAN 339 Typ Z1, Renk Doromat, VOITH 55.6335.xx, ZF TE-ML 03D/04D/11A/14A/17C/05L
Specification
Ford MERCON®, GM Dexron® II D
PROPERTIESDATAUNITEXAMINATION AFTER
Kinematic Viscosity at 40°C35,0MM²/SDIN 51659-2:2017-02
Kinematic Viscosity at 100°C7,2MM²/SDIN 51659-2:2017-02
Viscosity Index176DIN ISO 2909:2004-08
AppearanceREDVISUELL
Density at 15°C852KG/M³DIN EN ISO 12185:1997-11
Pour Point-54°CASTM D 7346:2015
Product Data Sheet

Notice
To the best of our knowledge, all information on this product page corresponded to the current findings and developments of Deutsche Ölwerke Lubmin GmbH at the time of creation. Our products are continuously further developed. For this reason, our products, the manufacturing processes and all related information on this product page are subject to change at any time and without notice, unless customer-specific agreements exist. The published data are based on standardized test methods under appropriate laboratory conditions and are to be regarded as general, non-binding guide values.

Proper disposal
After use, this oil belongs in a waste oil collection point! Improper disposal of used oil endangers the environment! Any admixture of foreign substances such as solvents, brake and cooling fluids is prohibited. Non-contaminated and empty packaging can be recycled.